那没办法了喵

而且另一个 RAID1c2 也没有出问题

但是其他盘是好的？

等下，不会又是内存坏掉了吧

好像没有 SMART Error Log Version: 1 No Errors Logged

我这边换了以后舒服很多了喵

如果是机箱风扇问题的话，依云姐姐可以尝试把风扇的固定方法换成胶钉，能几乎消灭与机箱的共振

比较轻微感觉

感觉幅度也不大

不会是机箱共振振坏掉了吧

SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 20952 - # 2 Short offline Completed without error 00% 12626 - # 3 Extended offline Completed without error 00% 5 - 通过了的

这 1T 都是在硬盘的开头，难道是外磁道更容易坏？

RAID1 还是起到作用了喵

组了 1T 的 RAID1c3，2T 的 RAID1c2

三块硬盘物理大小分别是 3T 3T 1T

/ark 是 RAID1c3，/data 是 RAID1c2

[m.image] 对于我来说够用了喵

反正有 RAID1c3 保底，，至少 RAID1c2 的那两个分区还没报错

42867 (seiuneko@pc) /w ❯❯❯ sudo hdparm -C /dev/sdb /dev/sdb: drive state is: active/idle 42868 (seiuneko@pc) /w ❯❯❯ sudo hdparm -C /dev/sdc /dev/sdc: drive state is: active/idle 42869 (seiuneko@pc) /w ❯❯❯ sudo hdparm -C /dev/sdd /dev/sdd: drive state is: active/idle

现在硬盘也好贵喵

等下十一点半左右自检跑完看下结果

quq

现在查询 hdparm -B 是没开的，印象里也从没开过

或者是每小时自动备份？

印象里我没开启来着

自动停转吗

这可能是什么原因呀

quq

❯❯❯ sudo btrfs device stats /ark [/dev/sdc1].write_io_errs 0 [/dev/sdc1].read_io_errs 0 [/dev/sdc1].flush_io_errs 0 [/dev/sdc1].corruption_errs 0 [/dev/sdc1].generation_errs 0 [/dev/sdd1].write_io_errs 0 [/dev/sdd1].read_io_errs 0 [/dev/sdd1].flush_io_errs 0 [/dev/sdd1].corruption_errs 0 [/dev/sdd1].generation_errs 0 [/dev/sdb1].write_io_errs 108911 [/dev/sdb1].read_io_errs 8794 [/dev/sdb1].flush_io_errs 5576 [/dev/sdb1].corruption_errs 2043420 [/dev/sdb1].generation_errs 2132

这样

* 对哦，怎么这么高

可能是没复制上，现在改好了（

* sdd: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 0x01 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 0x02 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 68 0x03 Spin_Up_Time 0x0007 129 129 024 Pre-fail Always - 444 (Average 445) 0x04 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3726 0x05 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 0x07 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 0x08 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33 0x09 Power_On_Hours 0x0012 097 097 000 Old_age Always - 22727 0x0a Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 0x0c Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3579 0xc0 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 3932 0xc1 Load_Cycle_Count 0x0012 097 097 000 Old_age Always - 3932 0xc2 Temperature_Celsius 0x0002 222 222 000 Old_age Always - 27 (Min/Max 7/55) 0xc4 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 0xc5 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 0xc6 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 0xc7 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0

d捉哦，怎么这么高

claude 说是 sdb1 喵

这个意思是 sdc1 出错了还是 sdb1 出错了呢 (device sdc1): read error corrected: ino 0 off 1865169039360 (dev /dev/sdb1 sector 1375387256)

sdd: === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 0x01 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 0x03 Spin_Up_Time 0x0027 167 163 021 Pre-fail Always - 2625 0x04 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5822 0x05 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 0x07 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 0x09 Power_On_Hours 0x0032 056 056 000 Old_age Always - 32250 0x0a Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 0x0b Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 0x0c Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5632 0xc0 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 1377 0xc1 Load_Cycle_Count 0x0032 195 195 000 Old_age Always - 15913 0xc2 Temperature_Celsius 0x0022 116 092 000 Old_age Always - 27 0xc4 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 0xc5 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 0xc6 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 0xc7 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 0xc8 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

sdc: === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 0x01 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 0x03 Spin_Up_Time 0x0027 167 163 021 Pre-fail Always - 2625 0x04 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5822 0x05 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 0x07 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 0x09 Power_On_Hours 0x0032 056 056 000 Old_age Always - 32250 0x0a Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 0x0b Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 0x0c Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5632 0xc0 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 1377 0xc1 Load_Cycle_Count 0x0032 195 195 000 Old_age Always - 15913 0xc2 Temperature_Celsius 0x0022 116 092 000 Old_age Always - 27 0xc4 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 0xc5 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 0xc6 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 0xc7 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 0xc8 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

/dev/sdb: === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 0x01 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 0x02 Throughput_Performance 0x0005 142 142 054 Pre-fail Offline - 63 0x03 Spin_Up_Time 0x0007 128 128 024 Pre-fail Always - 443 (Average 450) 0x04 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3448 0x05 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 0x07 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 0x08 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33 0x09 Power_On_Hours 0x0012 098 098 000 Old_age Always - 20952 0x0a Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 0x0c Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3306 0xc0 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 3599 0xc1 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 3599 0xc2 Temperature_Celsius 0x0002 200 200 000 Old_age Always - 30 (Min/Max 7/50) 0xc4 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 0xc5 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 0xc6 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 0xc7 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0

可能硬盘真的到寿了

这次插线都没有动，应该不是电压问题吧

我上次硬盘出问题还是 24P 松了导致 +3.3V 电压过低导致 M.2 掉盘

RAID1 发挥作用了

scrub 是 2 月 1 号零点开始的

坏了才发现之前 sdb2 sdc1 也有报错

[m.file] journalctl -k --no-pager| rg btrfs > btrfs.log

我找下

去年七月到现在，只有这个月报错了

搜了下之前的日志，只有这个月的 scrub 出错了

verify=8528 csum=2043420 Corrected: 2051948 这些代表错误计数吗

[m.image] image.jpeg

[m.image] 这是盘坏掉了吗，发现 btrfs scrub 出错了，但是 smart 看起来正常的，正在跑 long selftest